DANHER AKM22C-ANMN2-00 SERVO MOTOR

Maximum Speed: Can reach speeds of up to 3000 RPM, depending on the model and drive configuration.

Torque Ratings:

Rated Torque: Approximately 2.0 - 4.5 Nm, depending on the exact configuration.

Peak Torque: Can be significantly higher for short durations.

Inertia: Low rotor inertia for quick response and high performance.

Feedback Device: Typically equipped with an incremental or absolute encoder (often 2500 or 5000 pulses per revolution).

Resolution: High-resolution feedback for precise motion control.

Operating Temperature Range: Usually -10°C to +40°C, with derating above 40°C.

The DANHER AKM22C-ANMN2-00 is a servo motor typically used in industrial, robotics, and motion control applications. 

Rated Current: Typically in the range of 5-10 A (exact value depends on configuration).

Power Rating: Usually around 1.5 kW, but specific ratings can vary.

Phase: 3-phase AC motor.

Shaft Diameter: Typically 22 mm.

Length: Varies based on configuration (e.g., standard lengths like 150 mm, 200 mm, etc.).

Weight: Varies by configuration, often around 5-10 kg.