Part Number：SNAP-AIV-8

The OPTO 22 SNAP-AIV-8 is an analog input module designed for use with the SNAP I/O system. This module is used to measure analog signals and convert them into a format suitable for use in programmable logic controllers (PLCs) or other control systems. 

Voltage: Operates from a 24V DC power supply, which is common for SNAP I/O systems.

Current Consumption: Typically, the module will consume a small amount of current, usually specified in milliamps (mA), e.g., around 150 mA.

Channels: 8 independent analog input channels.

Signal Types: Can accept a range of analog signals including:

Voltage: 0-10V DC, ±10V DC, or other specified ranges.

Current: 4-20 mA, 0-20 mA.

Input Range:

Voltage Range: Common ranges include 0-10V, ±10V.

Current Range: Common ranges include 4-20 mA.

Input Resolution:

Resolution: Typically 12-bit or 16-bit resolution, which determines the precision of the analog-to-digital conversion.

 Signal Conversion:

Type: Analog-to-Digital Conversion.

Conversion Rate: The rate at which analog signals are converted to digital values, often expressed in samples per second (e.g., 100 Hz or 1 kHz).

Operating Temperature Range:

Range: Typically from 0°C to 70°C.

Storage Temperature Range:

Range: Typically from -20°C to 85°C.

Product type: Analog Input Module

Condition：100% Original