EPRO A6120 Vibration Monitoring Module

Brand/Manufacturer:EPRO

Part Number : A6120

Description: Vibration Monitoring Module

Dimensions: 3x19x12.8cm

Weight: 0.3 kg

The high output level and the low impedance of the measuring coil effect a high interference immunity. Subsequent measuring amplifiers of the EPRO MMS 3000 and MMS 6000 Machine Monitoring systems pick up and process the vibration signal without the need for additional intermediate amplifiers.

The A6210 monitor can be configured for average rod drop mode – used to monitor rider band wear in reciprocating compressors. Over time, rider bands wear horizontal reciprocating compressors due to the force of gravity acting on the horizontally-oriented piston in the compressor cylinder. If the rider band wears beyond spec, the piston can contact the cylinder wall and cause incremental machine damage and possible failure.

The CSI 6500 includes easy integration to the DeltaV and Ovation process systems, including pre-configured DeltaV Graphic Dynamos and Ovation Graphic Macros to speed operator graphic development. 

Two-channel, 3U size, 1-slot plug-in module decreases cabinet space requirements in half from traditional four-channel 6U size cards.

API 670 and API 618 compliant hot-swappable module.

Front and rear buffered and proportional outputs, 0/4-20 mA output, 0-10 V output

  +86-18965423501                     sales7@amikon.cn                            AMKPLC