MPL-B330P-SJ24AA

Product Origin:  USA

Type:Servo Motor

Dimension:25cmx8.5cmx12cm

Weight:5.5KG

Full Description: MPL-B330P-SJ24AA Bulletin MPL Low-Inertia Brushless Servo Motor, 460V, Frame Size 3 = 100mm (3.94in.), Stack Length 30 = 76.2mm (3.0in.), Rated Speed 5000RPM, Rated Torque 4.18Nm, Single-turn High-resolution Encoder, Keyed Shaft Extension, Circular Bayonet Connector (Facing Shaft), 24V DC Brake, IEC Metric, Free Mounting Holes (Type FF)

The MPL-B330P-SJ24AA servo motor requires regular maintenance, especially when a shaft seal has been incorporated. The servo motor and its seals must be inspected frequently and if excessive damage has occurred, these need to be replaced. In order to prolong the life of the servo motor, shields can be provided to protect the motor housing, shaft seals, and all of the connections.

The MPL-B330P-SJ24AA permanent magnet servo motor can be installed in a non-corrosive environment without any corrosive liquids, vapors, or gasses in it and which has a room with a temperature range between 0 and 40 degrees Celsius. A relative ambient humidity range of 5 to 95% is recommended. The MPL-B330P-SJ24AA permanent magnet servo motor comes with a voltage rating of 400 Volts AC.

This motor comes with a shaft key that improves the performance of the motor when it comes into contact with liquids. The housing provided by this motor protects it from dust particles and at the same time from different kinds of external contact. It is recommended to leave spaces on each side of the drive in order to guarantee proper ventilation.