The SIEMENS 6DR5310-0NG00-0AA0 is an electropneumatic positioner from Siemens' SIPART PS2 series, widely used for precise positioning of valve actuators in process  applications. It converts electrical control signals into pneumatic outputs, adjusting valve positions to achieve accurate process control. This positioner is designed for use in industries such as oil and gas, chemical, pharmaceutical, and water treatment, where robust and reliable valve control is critical.

6DR5310-0NG00-0AA0 Converts an electrical control signal (4-20 mA) into a proportional pneumatic output, accurately positioning control valves based on input signals.

Application: Commonly used in flow control, pressure control, and other process control applications that require precise valve positioning.

6DR5310-0NG00-0AA0 Input Signal: 4-20 mA 

Input Impedance: Typically < 500 Ω to ensure compatibility with a wide range of control systems.

Power Supply: Powered through the control loop, making it compatible with control systems that support current-loop power.

6DR5310-0NG00-0AA0 Operating range between 1.4 to 6 bar (20 to 90 psi), accommodating different air supply sources.

Clean, dry, and oil-free air recommended to avoid contamination and ensure durability.

Air Consumption: Minimal air consumption in steady-state conditions, making it energy-efficient.

Output Pressure: Proportional to the control signal, used to modulate the valve actuator for precise control.

6DR5310-0NG00-0AA0 Weight:  2-3 kg.

6DR5310-0NG00-0AA0 Operating Temperature: -30°C to +80°C, suitable for various environmental conditions, including outdoor installations.

Protection Class: IP66/NEMA 4X, ensuring excellent resistance against dust and water, suitable for harsh industrial environments.

Fail-Safe Function: Available fail-safe options, allowing the valve to move to a predefined position (fully open or closed) in the event of a power or signal failure.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Without limit monitor.