English
Brand/Manufature:
BENTIY NEVADAProduct Origin:
USALead Time:
In StockCondition:
Brand NewCertificate:
Coo/Test report/Warranty letterBently Nevada 3500/22M Transient Data Interface (TDI) Module provides the interface between the 3500 monitoring system and compatible software, including System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software. The module combines rack interface functions with data collection capabilities inside the 3500 rack.
The Bently Nevada 3500/22M Transient Data Interface, commonly referred to as the TDI, is a required component of the 3500 Machinery Protection System.
The 3500/22M provides the interface between the 3500 monitoring system and compatible software. It combines the functions of the 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor.
Within the 3500 rack, the TDI interfaces with M-series monitors, including the 3500/40M and 3500/42M, to continuously collect steady-state and transient dynamic waveform data. The collected data can then be passed through an Ethernet link to host software.
Static data capture is a standard capability of the TDI. Dynamic and high-resolution transient data capture requires the applicable optional Channel Enabling Disk.
The TDI also performs functions common to the entire rack. However, according to the manufacturer documentation, it is not part of the critical monitoring path and does not affect the proper normal operation of the overall monitoring system for automatic machinery protection. Every 3500 rack requires one TDI or RIM.
| Specification | Official Data |
|---|---|
| Manufacturer | Bently Nevada |
| Model | 3500/22M |
| Product Name | Transient Data Interface Module |
| Abbreviation | TDI |
| System | 3500 Machinery Protection System |
| Rack Position | Slot 1, adjacent to the power supplies |
| Monitor Interface | 3500 M-series monitors |
| Software Interface | System 1 Condition Monitoring and Diagnostic software; 3500 System Configuration software |
| Data Collection | Steady-state and transient dynamic waveform data |
| Static Data Capture | Standard |
| Dynamic Data Capture | Requires the applicable optional Channel Enabling Disk |
| Host Communication | Ethernet |
| Front Communication | USB port |
| Rear Communication | 10/100 Ethernet connection |
| Rack Requirement | One TDI or RIM per 3500 rack |
The primary role of the 3500/22M TDI is to connect the 3500 rack with configuration, condition monitoring, and diagnostic software. It communicates with M-series monitor modules inside the rack and continuously collects steady-state and transient dynamic waveform information.
The 3500/22M also serves as the gateway between the 3500 rack and System 1 Machinery Condition Monitoring software. A USB port on the front provides access for configuration, while the rear I/O module provides a 10/100 Ethernet connection for System 1 communication.
Lifecycle Status: Lifecycle status is not specified in the available official manufacturer documentation.
The 3500/22M is documented on the official Bently Nevada / Baker Hughes 3500 Machinery Protection System product page, where the manufacturer also provides the 3500/22M Transient Data Interface Module Datasheet. Current publication on the manufacturer's website should not be interpreted as an official lifecycle classification.
This page therefore does not independently classify the 3500/22M as Active, Mature, Phase-out, Discontinued, Obsolete, or another lifecycle stage.
According to Bently Nevada official documentation, the 3500/22M is used within the 3500 Machinery Protection System for:
The broader 3500 system is intended for continuous online machinery monitoring and protection. When connected with System 1 software, the system can also provide continuous condition monitoring information.
The 3500/22M Transient Data Interface Module is specifically documented for use within the Bently Nevada 3500 Machinery Protection System. Manufacturer documentation identifies the 3500/40M and 3500/42M as examples of M-series monitor modules with which the TDI interfaces for data collection.
Compatible software: System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software.
The Bently Nevada 3500/22M is installed in Slot 1 of the 3500 rack, immediately adjacent to the power supplies. Every 3500 rack requires one TDI or RIM. The module performs rack-level communication and data collection functions while remaining outside the critical monitoring path used for automatic machinery protection.
The module continuously collects steady-state and transient dynamic waveform data from compatible M-series monitor modules. Static data capture is standard. Additional dynamic and high-resolution transient data capture requires the applicable optional Channel Enabling Disk.
It is a Transient Data Interface (TDI) Module used in the 3500 Machinery Protection System to interface the monitoring system with compatible software.
The TDI occupies Slot 1 of the 3500 rack, immediately adjacent to the power supplies.
Yes. Bently Nevada identifies the 3500/22M as an interface between the 3500 monitoring system and System 1 Condition Monitoring and Diagnostic software.
It works with compatible M-series monitors to continuously collect steady-state and transient dynamic waveform data. Static data capture is standard, while applicable optional enabling is required for dynamic and high-resolution transient data capture.
No. Manufacturer documentation states that the TDI is not part of the critical monitoring path and does not affect the proper normal operation of the overall monitoring system for automatic machinery protection.
The available official manufacturer documentation does not specify an explicit lifecycle classification such as Active, Mature, Discontinued, or Obsolete.
Third-party technical sources used: No. Unsupported technical information added: No.
Packing & Delivery
1)100% full New! - Original Factory Seal !
2)Warranty: 12 months!
3)Package: Original packing with cartons.
4)Delivery time: Shipped in 3 days after payment
Best Quality Assurance
1. We only provide the original new items, 100% make sure the best quality!
2. 1 year warranty GUARANTEE OF QUALITY (After Our Delivery Date).
We will ship all items within 1-3 working days upon receipt of payment,our goal is: ship it as fast as we can.And normally 2-3 days will be arrived.
+86 18965423501 
sales7@amikon.cn 
AMKPLC
|
Brand |
Model |
Brand |
Model |
|
Bently Nevada |
330180-90-00 |
Bently Nevada |
3500/42M 176449-02 |
|
Bently Nevada |
330180-50-00 |
Bently Nevada |
3500/45 176449-04 |
|
Bently Nevada |
330180-92-05 |
Bently Nevada |
3500/32M 149986-02 |
|
Bently Nevada |
330180-91-05 |
Bently Nevada |
3500/40M 140734-01 |
|
Bently Nevada |
330500-00-20 |
Bently Nevada |
3500/53 133388-01 |
|
Bently Nevada |
330130-040-00-00 |
Bently Nevada |
3500/33 149986-01 |
|
Bently Nevada |
330104-06-12-10-02-00 |
Bently Nevada |
3500/54M 286566-01 |
|
Bently Nevada |
330104-00-10-10-02-00 |
Bently Nevada |
330104-00-06-05-02-00 |
|
Bently Nevada |
330104-00-06-05-02-00 |
Bently Nevada |
330103-00-04-10-02-00 |
+86 18965423501 sales7@amikon.cn AMKPLC
Get regular updates and real automation insights straight to your inbox.
IPv6 network supportedDisclaimer: Amikon sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Amikon is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
