Claim Your Exclusive Savings – Get in Touch with Sales Manager Lisa Lin Now

: +86-18965423501                            : sales7@amikon.cn                             :AMKPLC

The Bently Nevada 330101-00-08-10-11-05 is a 3300 XL 8 mm Proximity Probe designed for use as part of the 3300 XL 8 mm Proximity Transducer System. Within the complete system, the probe works with the corresponding extension cable and Proximitor® Sensor to provide non-contact measurement of the distance between the probe tip and a conductive target surface.

The 3300 XL 8 mm Transducer System produces an output voltage directly proportional to the distance between the probe tip and the observed conductive surface. This operating principle enables the system to measure both static (position) and dynamic (vibration) values, allowing the same transducer system to support different machinery monitoring parameters.

Primary applications include vibration and position measurements on fluid-film bearing machines. The system can also be used for Keyphasor® reference and speed measurements, providing measurement capabilities required for monitoring rotating machinery.

The 3300 XL 8 mm system delivers the advanced performance characteristics of Bently Nevada's eddy current proximity transducer systems. In particular, the standard 3300 XL 8 mm 5-meter system fully complies with the American Petroleum Institute (API) 670 Standard, 4th Edition, covering requirements for mechanical configuration, linear range, accuracy, and temperature stability.

Frequently Asked Questions

Q : What is the probe tip diameter for this model?

It is an 8mm probe system, meaning the physical diameter of the probe tip is 8 millimeters.

Q : What is the thread type used on the 330101 probe body?

It utilizes standard 3/8-24 UNF threads

Q : Does this probe comply with API 670 standards?

Yes, the Bently Nevada 3300 XL 8mm series is designed to fully meet American Petroleum Institute (API) 670 standards for machinery protection systems.

Q : What is the standard linear range and scale factor for this system?

It has a linear range of 2.0 mm (80 mils) and a standard scale factor of 7.87 V/mm (200 mV/mil).

Product Applications

Power Industry: Used in steam turbines, gas turbines, generators, and large boiler feed pumps in thermal power plants, hydropower plants, and nuclear power plants to monitor rotor shaft vibration and displacement.

Oil and Gas Industry: Used in large centrifugal compressors, reciprocating compressors, fans, and heavy-duty pumps in oil refineries, natural gas pipelines, and processing plants for real-time vibration and fault warning.

Metallurgy and Mining Industry: Installed on large rolling mills, blast furnace blowers, and high-power drive motors operating under high loads and long-term continuous operation to monitor the stability of bearings and support systems.