The Bently Nevada 330103-00-21-10-02-00 Proximity Probe is part of the 3300 series of proximity probes from Bently Nevada, designed for precise vibration, displacement, and position measurements in critical rotating machinery applications. These probes are used in condition monitoring systems to detect machine health issues such as misalignment, imbalance, and bearing wear, helping to prevent costly failures by providing early warning signals.

Series: 3300

Model: 330103-00-21-10-02-00

Probe Type: Proximity Probe (used to measure axial displacement or shaft vibration)

Cable Length: Typically, this model has a cable length option that can vary depending on the specific setup, with common lengths such as 7.5 meters.

330103-00-21-10-02-00  7.87 V/mm (200 mV/mil) – This sensitivity allows the probe to detect minute displacements, making it ideal for monitoring small shifts in machinery alignment or vibrations.

Measurement Range: -0.25 mm to +2.25 mm – This range is suitable for monitoring the health of most industrial rotating equipment, including turbines, motors, compressors, and fans.

Frequency Response: 0 to 10 kHz.

Operating Temperature: -40°C to +85°C (-40°F to +185°F) – The probe is built to operate in a wide range of temperatures, making it suitable for diverse industrial environments, including extreme conditions.

 With a sensitivity of 7.87 V/mm, this 330103-00-21-10-02-00 probe can detect small changes in vibration and displacement, which is essential for early detection of mechanical problems such as misalignment or imbalance.

 The 330103-00-21-10-02-00 probe is designed for harsh industrial environments, with high temperature tolerance and protection against environmental factors like moisture and dust, ensuring reliability and longevity.

330103-00-21-10-02-00 Provides continuous and accurate measurement of axial displacement, helping to detect changes in machine conditions that could indicate potential failures.

 This 330103-00-21-10-02-00 probe integrates seamlessly with Bently Nevada's monitoring systems, such as the 3500 Series Machinery Protection System, and can be used with other vibration monitoring and protection solutions.

Durability and Reliability: Designed to withstand harsh environmental conditions, this probe offers long-term performance with minimal maintenance, reducing downtime and operational costs.

The wide frequency range (0 to 10 kHz) ensures that the 330103-00-21-10-02-00 probe can monitor both low-frequency and high-frequency vibrations, providing a thorough analysis of machine health.