Claim Your Exclusive Savings – Get in Touch with Sales Manager Lisa Lin Now

: +86-18965423501                            : sales7@amikon.cn                             :AMKPLC

The Bently Nevada 330104-00-03-90-11-00 is a 3300 XL 8 mm Proximity Probe designed for use as part of the 3300 XL 8 mm Proximity Transducer System. Within the complete system, the probe operates with the corresponding extension cable and Proximitor® Sensor to provide non-contact measurement between the probe tip and an observed conductive target surface.

The 3300 XL 8 mm Transducer System provides an output voltage directly proportional to the distance between the probe tip and the conductive surface. As the physical gap between the probe tip and target changes, the system produces a corresponding change in output voltage.

This operating principle enables the system to measure both static and dynamic values. Static measurements represent position, while dynamic measurements represent vibration, allowing the same transducer system to support different machinery measurement requirements.

The system is primarily used for vibration and position measurements on fluid-film bearing machines. Its non-contact measurement principle enables changes in the position or movement of the observed conductive surface to be measured without requiring physical contact between the probe tip and target.

Frequently Asked Questions

Q1: What is the Bently Nevada 330104-00-03-90-11-00?
It is an 8mm proximity probe belonging to the 3300 XL series, used for non-contacting vibration and displacement measurements.

Q2: What does the "330104" prefix mean?
It signifies an 8mm proximity probe with a 3/8-24 UNF thread and a smooth unthreaded section.

Q3: What does the first option "00" represent?
It specifies the unthreaded length of the probe case, which is 0 inches (fully threaded case).

Q5: What does the third option "90" mean?
It indicates the total cable length, which is 9.0 meters (approx. 29.5 feet).

Product Applications

Oil and Gas: Used for monitoring compressors and large pump sets in drilling platforms and refineries.
Power Generation: Used for measuring shaft vibration and displacement in steam turbines, water turbines, and generator sets.
Chemical Industry: Used for chemical pumps and fans that withstand humid, slightly corrosive, or harsh environments.
Metallurgy and Mining: Used for condition monitoring of rotating machinery such as high-load rolling mills and blowers.