Bently Nevada 330173-00-02-10-02-CN  3300 XL series and is specifically designed for precise, non-contact measurement of vibration, displacement, and position in rotating machinery. These probes are a key component in machinery protection systems, helping to monitor the condition of critical machinery and prevent unexpected failures.

The Bently Nevada 330173-00-02-10-02-CN Proximity Probe works in conjunction with an extension cable and a Proximitor sensor, forming a proximity transducer system that offers real-time monitoring of critical machine components, including shafts, bearings, and rotors. The probe is capable of operating in harsh industrial environments and is designed to deliver accurate readings even under extreme conditions, such as high temperatures and high vibration levels.

8 mm tip diameter, suitable for a variety of machinery applications.

Bently Nevada 330173-00-02-10-02-CN  Probe Length:2 meters (6.56 feet) cable length, providing flexibility for installation in different configurations.

When combined with the extension cable, the total system length can reach up to 10 meters (32.8 feet).

The 330173-00-02-10-02-CN probe has a typical sensing range of 2 mm, suitable for measuring small displacements in machinery components.

The 330173-00-02-10-02-CN linear measurement range is 0 to 80 mils (0 to 2 mm).

The 330173-00-02-10-02-CN probe can detect vibration and displacement changes in machinery operating at frequencies up to 10 kHz, making it suitable for high-speed rotating equipment.

Stainless steel construction ensures high durability and resistance to corrosion in demanding environments.

The 330173-00-02-10-02-CN cable jacket is made of Fluoropolymer (FEP), which provides excellent resistance to chemicals, heat, and abrasion, ensuring a long service life.

Length: 10 meters (when paired with the appropriate extension cable).

The probe is designed to work with Bently Nevada Proximitor sensors, which condition the output signal and provide linear data for analysis and monitoring.

The 330173-00-02-10-02-CN  probe is ideal for detecting vibrations in rotating equipment, such as turbines, compressors, and pumps, helping to identify issues like imbalance or misalignment early on.

330173-00-02-10-02-CN It can measure the position of a rotating shaft relative to the stationary part of the machine, which is crucial in maintaining proper clearance and ensuring efficient operation.

This proximity probe is suitable for monitoring axial displacement in thrust-bearing applications, ensuring protection against excessive thrust loads.

Typically rated at IP67, protecting against dust and temporary water immersion, making the probe suitable for harsh industrial environments.

Provides precise, non-contact measurement of machine components, reducing wear and tear on sensitive parts and enhancing the accuracy of readings.

The 330173-00-02-10-02-CN stainless steel housing and FEP-insulated cable make the probe highly durable, capable of withstanding challenging environments.

The 330173-00-02-10-02-CN 2-meter cable length offers installation flexibility, especially in large machinery setups where longer cable runs are required.

Skype

WhatsApp

Email

WeChat

 +86 18030132585       

+86 18030132585

sales16@amikon.cn

ZXD18030132585