For additional discounts, please contact our five-star sales manager Lisa Lin.

Description：

The primary uses for the 3300 XL NSv Transducer System arefor areas where counter bore, sideview, or rearviewrestrictions limit the use of standard Bently Nevada 3300 and3300 XL 5 and 8 mm Transducer Systems. It is also ideal forsmall target applications, such as measuring radial vibrationon shafts smaller than 51 mm (2 in) or axial position on flattargets smaller than 15 mm (0.6 in). It is primarily used in thefollowing applications on fluid-filmed bearing machineswhere a small shaft or reduced side-view is present:

Radial vibration and radial position measurements

Axial (thrust) position measurements

Tachometer and zero speed measurements

Phase reference (Keyphasor signals)

The 3300 XL NSv Transducer System has anAverage Scale Factor of 7.87 V/mm (200mV/mil), which is the most common output foreddy current transducers. Its enhanced side-view and small target characteristics give it ashorter linear range than the Bently Nevada3300 XL-series 5 and 8 mm Transducer System.The 1.5 mm (60 mils) of linear range exceedsthe linear range of the 3000-series 190Transducer System.

Specification：

Frequently asked questions

Q1: What is the Bently Nevada 330903-00-13-10-02-05 Proximity Probe used for?

A: The 330903-00-13-10-02-05 is a non-contact proximity probe used for measuring shaft vibration, shaft position, and displacement in rotating machinery.  

Q2: What is the overall case length of this 330903-00-13-10-02-05 proximity probe?

A: The -13 option indicates an overall case length of 130 mm, making it suitable for a variety of industrial installation requirements.

Q3: What is the total length of the 330903-00-13-10-02-05 probe assembly?

A: The -10 option specifies a total length of 1.0 meter (39 inches).

Q4: What does Agency Approval Code 05 mean?

A: The -05 option indicates Multiple Approvals, meaning the probe meets multiple industry certification requirements for use in various industrial and potentially hazardous environments.

Product Applications

Air and gas compressor plants (centrifugal compressors): This is the core application scenario for this probe.

Large refrigeration and freezing plants: Used to monitor the bearing condition of large industrial refrigeration compressors and refrigeration units.

Petrochemical and oil refineries: In complex flammable and explosive areas, utilizing its explosion-proof certification (option 05), it monitors the shaft condition of various small and medium-sized steam turbines and pump units.

Power plants (conventional and industrial self-owned power plants): Used to monitor the rotational speed, key phase (phase reference), and zero speed of small and medium-sized fans, feedwater pumps, or auxiliary equipment with small shaft diameters (shaft diameter less than 51 mm).