For additional discounts, please contact our five-star sales manager Lisa Lin.

Description：

The primary uses for the 3300 XL NSv Transducer System arefor areas where counter bore, sideview, or rearviewrestrictions limit the use of standard Bently Nevada 3300 and3300 XL 5 and 8 mm Transducer Systems. It is also ideal forsmall target applications, such as measuring radial vibrationon shafts smaller than 51 mm (2 in) or axial position on flattargets smaller than 15 mm (0.6 in). It is primarily used in thefollowing applications on fluid-filmed bearing machineswhere a small shaft or reduced side-view is present:

Radial vibration and radial position measurements

Axial (thrust) position measurements

Tachometer and zero speed measurements

Phase reference (Keyphasor signals)

The 330904-00-14-10-02-CN is a Bently Nevada 3300 NSv Proximity Probe. It is designed to measure static and dynamic shaft positions and vibrations, particularly for small or high-speed machinery. The "-CN" suffix denotes a China-specific version that complies with local regional standards.

Specification：

Frequently asked questions

Q1: What is the Bently Nevada 330904-00-14-10-02-CN Proximity Probe used for?

A: The 330904-00-14-10-02-CN is a non-contact proximity probe used for monitoring shaft vibration, shaft position, and displacement in rotating machinery. It is commonly applied in machinery protection and condition monitoring systems.

Q2: What is the linear measurement range of the 330904-00-14-10-02-CN?

A: The 330904-00-14-10-02-CN probe provides a linear measurement range of 0.25 to 1.75 mm (10 to 70 mils), allowing accurate displacement measurements across a wide operating range.

Q3: What is the linear starting point of the 330904-00-14-10-02-CN probe?

A: The linear starting point is approximately 0.25 mm (10 mils) from the target surface, providing a reference for proper probe installation and calibration.

Q4: What is the total system length of the 330904-00-14-10-02-CN?

A: The -10 option specifies a total system length of 1.0 meter (39 inches).

Product Applications

Oil & Gas & Refining: Monitoring of auxiliary compact moving equipment for gas pipeline compressors and heavy oil catalytic cracking units.

Chemical & Coal Chemical: Monitoring of high-concentration chemical corrosion environments in compressors for various process gases (e.g., synthetic ammonia, methanol-to-olefins).

Metallurgy & Iron & Steel: Monitoring of small steam turbine units for blast furnace blowers and blast furnace gas residual pressure power generation (TRT) units.

Power & Energy: Vibration and speed safety protection at critical bearings of small industrial steam turbines and water turbines.