For additional discounts, please contact our five-star sales manager Lisa Lin.

Description：

The 3300 XL NSv Proximity Transducer system is intended foruse with centrifugal air compressors, refrigerationcompressors, process gas compressors, and other machineswith tight installation requirements. The 3300 XL NSv ProximityTransducer System consists of:

a 3300 NSv probe

a 3300 NSv extension cable

a 3300 XL NSv Proximitor Sensor(1)

The 3300 XL NSv Transducer System design allows it toreplace both the 3300 RAM Transducer Systems and the3000-series or 7000-series 190 Transducer System. Upgradesfrom the 3300 RAM system to the 3300 XL NSv system mayuse the existing probe, extension cable, and monitoring system with 3300 XL NSv ProximitorSensor. Upgrades from the 3000-series or7000-series Transducer System must replacethe probe, extension cable, and ProximitorSensor with NSv components.

Specification：

Frequently asked questions

Q1: What is the Bently Nevada 330904-00-22-10-02-CN 3300 NSv Proximity Probe?

A: The 330904-00-22-10-02-CN is a 3300 NSv Proximity Probe used for non-contact measurement of shaft vibration, shaft position, and displacement in rotating machinery.

Q2: What temperatures can this 330904-00-22-10-02-CN probe handle?

The 330904-00-22-10-02-CN probe tip and its integrated cable are rated for high-reliability operations from -52°C to +177°C (-62°F to +351°F).

Q3: What is the 330904-00-22-10-02-CN maximum tightening torque for installing this probe?

The 330904-00-22-10-02-CN maximum recommended mounting torque is 5.1 N·m (45 in·lbs). Exceeding this torque can strip the M8 threads or damage the internal sensor electronics.

Q4: What is the 330904-00-22-10-02-CN recommended gap voltage for initial installation?

The recommended physical gap is 1.0 mm (40 mils), which roughly translates to an electrical gap voltage of -10.0 Vdc mid-range when using a standard 4140 steel target.

Product Applications

Petrochemical & O&G: Monitoring of critical components in centrifugal/reciprocating compressors, large pumps, and turbines.

Power Generation: Monitoring vibration and axial displacement of bearings in small and medium-sized steam turbines, water turbines, auxiliary pumps, fans, and generators in thermal, hydroelectric, or nuclear power plants.

Chemical & Refining: Monitoring the bearing condition of high-risk, continuously operating equipment such as reactor agitators, high-speed fans, and chemical pumps.

Metallurgy, Iron & Steel & Cement: Monitoring mechanical vibration of large blast furnace blowers, rolling mill shafts, and the drive system of cement clinker rotary kilns.