For additional discounts, please contact our five-star sales manager Lisa Lin.

Description：

The primary uses for the 3300 XL NSv Transducer System arefor areas where counter bore, sideview, or rearviewrestrictions limit the use of standard Bently Nevada 3300 and3300 XL 5 and 8 mm Transducer Systems. It is also ideal forsmall target applications, such as measuring radial vibrationon shafts smaller than 51 mm (2 in) or axial position on flattargets smaller than 15 mm (0.6 in). It is primarily used in thefollowing applications on fluid-filmed bearing machineswhere a small shaft or reduced side-view is present:

Radial vibration and radial position measurements

Axial (thrust) position measurements

Tachometer and zero speed measurements

Phase reference (Keyphasor signals)

Specification：

Frequently asked questions

Q1: What is the Bently Nevada 330905-00-16-10-02-CN used for?

A1:The Bently Nevada 330905-00-16-10-02-CN is a 3300 NSv Proximity Probe used for non-contact measurement of shaft vibration, displacement, and position in rotating machinery. It is commonly used in machinery protection and condition monitoring systems.

Q2: What power supply is required for this 330905-00-16-10-02-CN probe?

A2:The 330905-00-16-10-02-CN probe requires an operating voltage of -17.5 VDC to -26 VDC to ensure proper performance within the 3300 NSv transducer system.

Q3: What is the 330905-00-16-10-02-CN supply sensitivity specification?

A3:The 330905-00-16-10-02-CN probe has a supply sensitivity of less than 2 mV, indicating that changes in the power supply have minimal effect on measurement accuracy.

Q4: Why is low supply sensitivity important?

A4:Low supply sensitivity helps maintain stable output signals and accurate measurements, even when minor power supply fluctuations occur.

Q5: What is the recommended gap setting for this 330905-00-16-10-02-CN probe?

A5:The recommended gap setting is 1.0 mm (40 mils), which helps ensure optimal probe performance and measurement reliability.

Product Applications

Oil and gas chemical plants: Key gas pumps and compressors in refineries, liquefied natural gas (LNG) plants, and ethylene plants.

Air separation and industrial gas plants: Centrifugal air compressors in large air separation units.

Large-scale refrigeration and freezing plants: Large industrial refrigeration compressors  (supporting) chemical or logistics cold chain systems.

Power plants: Small and medium-sized steam turbines, industrial gas turbines, high-pressure feedwater pumps, and generator sets.

Steel and metallurgical plants: Blast furnace blowers and large exhaust fans.