Claim Your Exclusive Savings – Get in Touch with Sales Manager Lisa Lin Now

: +86-18965423501                            : sales7@amikon.cn                             :AMKPLC

The primary uses for the 3300 XL NSv Transducer System are for areas where counter bore, sideview, or rearview restrictions limit the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for small target applications, such as measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in). It is primarily used in the following applications on fluid-filmed bearing machines where a small shaft or reduced side-view is present:

Radial vibration and radial position measurements

Axial (thrust) position measurements

Tachometer and zero-speed measurements

Phase reference (Keyphasor signals)

The 3300 XL NSv Transducer System design allows it to replace both the 3300 RAM Transducer Systems and the 3000-series or 7000-series 190 Transducer System. Upgrades from the 3300 RAM system to the 3300 XL NSv system may use the existing probe, extension cable, and monitoring system with 3300 XL NSv Proximitor Sensor. Upgrades from the 3000-series or 7000-series Transducer System must replace the probe, extension cable, and Proximitor Sensor with NSv components.

Frequently Asked Questions

Q1: What is the Bently Nevada 330905-00-24-10-02-05 Transducer System used for?

A1: It is used for non-contact vibration and shaft position monitoring in rotating machinery protection and condition monitoring systems.

Q2: What is the overall case length of the 330905-00-24-10-02-05 probe?

A2: Overall Case Length Option 24 is 240 mm.

Q3: What is the 330905-00-24-10-02-05 total system length?

A3: Total Length Option 10 is 1.0 meter (39 inches).

Q4: What connector and cable type does the 330905-00-24-10-02-05 system use?

A4: Connector and Cable-Type Option 02 includes a miniature coaxial ClickLoc connector with a standard cable.

Product Applications

Oil and Gas: Monitoring of long-distance oil and gas pipelines and oil production platform units.

Petrochemicals: Handling complex chemical processes containing corrosive gases.

Refrigeration and Air Separation: Operation control of high-power industrial refrigeration units.

Conventional Power: Ensuring the safety of industrial steam turbines and water turbines.