For additional discounts, please contact our five-star sales manager Lisa Lin.

Description：

The primary uses for the 3300 XL NSv Transducer System arefor areas where counter bore, sideview, or rearviewrestrictions limit the use of standard Bently Nevada 3300 and3300 XL 5 and 8 mm Transducer Systems. It is also ideal forsmall target applications, such as measuring radial vibrationon shafts smaller than 51 mm (2 in) or axial position on flattargets smaller than 15 mm (0.6 in). It is primarily used in thefollowing applications on fluid-filmed bearing machineswhere a small shaft or reduced side-view is present:

Radial vibration and radial position measurements

Axial (thrust) position measurements

Tachometer and zero speed measurements

Phase reference (Keyphasor signals)

Specification：

Frequently asked questions

Q1: What is the Bently Nevada 330908-00-20-10-02-00 Proximity Probe used for?

A1: The 330908-00-20-10-02-00 Proximity Probe is designed for non-contact measurement of shaft vibration, shaft position, displacement, and runout in rotating machinery monitoring and protection systems.

Q2: What is the overall case length of this 330908-00-20-10-02-00 probe?

A2: Overall Case Length Option 20 corresponds to 2.0 inches (50.8 mm).

Q3: What is the total length of the 330908-00-20-10-02-00 probe cable?

A3: Total Length Option 10 corresponds to 1.0 meter (39 inches).

Q4: What type of connector is included with this 330908-00-20-10-02-00 probe?

A4: Connector and Cable-Type Option 02 includes a miniature coaxial ClickLoc connector with a standard cable, providing secure installation and reliable signal transmission.

Q5: What is the output resistance of the 330908-00-20-10-02-00 probe?

A5: The 330908-00-20-10-02-00 probe has an output resistance of 50 Ω, helping ensure stable electrical performance and compatibility with associated monitoring equipment.

Product Applications

Air and gas compressor manufacturers: Widely used in centrifugal air compressors, refrigeration compressors, and process gas compressors.

Industrial pumps and small turbines: Measuring shaft vibration of thin shafts less than 51mm (2 inches) in diameter within the compact bearing housing of pumps and motors.

Precision gearbox industry: Monitoring at special locations with extremely limited internal installation space, or where there are metal walls (in-hole mounting) in the reverse or lateral direction.

Petrochemical and power plants: Serving as a core front-end sensor in plant-level condition monitoring and protection systems for rotating machinery (such as the Bently Nevada 3500 system).