Manufacturer : Bently Nevada

Product No. : 330909-00-90-05-02-CN

Product Type : Proximity Transducer System

Made in U.S.A 

Can add on Certificate Of Origin (COO)

330101 - 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor

Unthreaded Length Option : 00 - 0.0 in

Overall Case Length Option : 90 - 9.0 in

Total Length Option : 05 - 0.5 metre (1.6 feet)

Connector and Cable-Type Option: 02 -Miniature coaxial ClickLoc connector, standard cable

Agency Approval Option: CN-Indicates China-specific certification or regional standards compliance.

Accuracy:Typically ±0.25 mils

Linear Range:Approximately 1.5 mm (60 mils).

Operating Temperature: Ranges from -52°Cto +177°C(-62°F to +351°F).

Frequency Response: Typically O to 10 kHz.

The 3300 XL NSv Proximity Transducer system is intended for use with centrifugal air compressors, refrigeration compressors, process gas compressors, and other machines with tight installation requirements. The 3300 XL NSv Proximity Transducer System consists of:

A 3300 NSv probe

A 3300 NSv extension cable

A 3300 XL NSv Proximitor Sensor

The primary uses for the 3300 XL NSv Transducer System are for areas where counter bore, sideview, or rearview restrictions limit the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for small target applications, such as measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in).It is primarily used in the following applications on fluid-film bearing machines where a small shaft or reduced side-view is present:

Radial vibration and radial position measurements

Axial (thrust) position measurements

Tachometer and zero speed measurements

Phase reference (Keyphasor signals

Frequently Asked Questions

Q1: What is the 330909-00-90-05-02-CN?

A1: The 330909-00-90-05-02-CN is a Bently Nevada 3300 NSv proximity transducer system, designed for precise vibration and shaft displacement monitoring in rotating machinery.

Q2: What is the 330909-00-90-05-02-CN measurement accuracy?

A2: The system provides an accuracy of typically ±0.25 mils, ensuring reliable and precise measurements.

Q3: What is the 330909-00-90-05-02-CN linear range?

A3: It offers a linear range of approximately 1.5 mm (60 mils).

Q4: What is the 330909-00-90-05-02-CN operating temperature range?

A4: It operates within −52°C to +177°C (−62°F to +351°F), suitable for extreme industrial environments.

Q5: What is the 330909-00-90-05-02-CN frequency response?

A5: The system supports a frequency response from 0 to 10 kHz, enabling both static and dynamic measurements.

Product Applications

Steam turbines and auxiliary equipment: Used to monitor the shaft vibration, axial displacement and rotational speed of small steam turbines and water turbines' auxiliary equipment (such as feed pumps, exhaust fans).

Generators: Real-time monitoring of the operating condition of generator bearings to prevent equipment damage due to excessive vibration.

Compressors and expanders: In centrifugal or reciprocating compressors, this probe can accurately sense the minute gap changes between the shaft and the bearing, providing critical anti-stall monitoring data.

High-speed pumps: Suitable for non-contact condition monitoring of high-speed chemical process pumps.

Motor monitoring: Monitoring the rotor dynamic performance of large industrial motors.

Gearboxes: By measuring the dynamic vibration of the gear shaft, it can warn of gear wear or misalignment problems.

Claim Your Exclusive Savings – Get in Touch with Sales Manager Lisa Lin Now

: +86-18965423501                            : sales7@amikon.cn                             :AMKPLC