The Bently Nevada 3400/40M 140734-01 is a Proximitor Monitor designed for vibration monitoring and shaft position measurement in rotating machinery. This monitor is a part of Bently Nevada’s 3300 series and is primarily used in machinery protection systems, where it helps detect issues like shaft misalignment, imbalance, and other mechanical faults. It is commonly applied in industries such as oil and gas, power generation, and other heavy industries where equipment reliability is critical.

Brand: Bently Nevada

Model: 3400/40M

Part Number: 140734-01

Product Type: Proximitor Monitor

3400/40M 140734-01 Transmits a 4-20 mA output proportional to the measured vibration or displacement level, enabling integration with control systems such as Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC).

3400/40M 140734-01 Allows real-time monitoring and alarming when vibration exceeds safe thresholds, enabling prompt action.

3400/40M 140734-01 Provides precise measurements to detect minor changes in shaft position or vibration, enabling early detection of mechanical issues.

Measurement Range: 3400/40M 140734-01 supports a displacement measurement range up to 80 mils (2 mm).

3400/40M 140734-01 Frequency Range: 0 to 10 kHz, suitable for capturing a wide range of vibration frequencies in rotating machinery.

3400/40M 140734-01 Output Signal: 4-20 mA DC, corresponding to vibration amplitude or displacement level.

Power Supply: Typically operates on a 24 V DC power supply.

Operating Temperature: -35°C to +85°C.

3400/40M 140734-01 Sensitivity: around 8 mV/mil (200 mV/mm) for standard configurations.

+86 18030132585                        +86 18030132585                             sales16@amikon.cn            ZXD18030132585