Description：

The 3300 XL 8 mm system delivers the most advanced performance in our eddycurrent proximity tronsducer systems. The standard 3300 XL 8 mm 5-metresystem also fully complies with the American Petroleum Institute's (APl) 670Standard (4th Edition) for mechanical configuration, lineor range, accuracy, andtemperature stability,. All 3300 XL 8 mm proximity transducer systems providethis level of performance and support complete interchangeability of probes.extension cables, and Proximitor sensors, eliminoting the need to motch orbench calibrate individual components.

Specification：

Frequently asked questions

Q1: What is the Bently Nevada 330101-00-09-20-02-05?

A1: It is a 3300 XL 8 mm proximity probe designed for non-contact measurement of vibration and shaft position in rotating machinery.

Q2: What does the “-00” option indicate?

A2: The “-00” code specifies an unthreaded length of 0.0 inches.

Q3: What does the “-09” option represent?

A3: The “-09” code indicates an overall case length of 0.9 inches.

Q4: What is the total length of the probe?

A4: The “-20” option corresponds to a total length of 2.0 meters (approximately 6.6 feet).

Q5: What type of applications is this probe used for?

A5: It is commonly used in turbines, compressors, pumps, and motors for accurate vibration monitoring and shaft displacement measurement.

Product Applications

Oil and gas: Refineries, petrochemical plants, pumps, compressors, fans, etc. of natural gas transmission pipelines.

Electricity: Steam turbines, water turbines, power generation units of power plants.

Chemical industry: Chemical fertilizer plants, pharmaceutical factories, bearing monitoring of large chemical raw material reactors.

Water resources and water treatment: Monitoring of the operating status of large pump units.

Steel and metallurgy: Blast furnace fans, compressor units.

General rotating machinery: High-speed gearboxes, centrifuges, extruders, etc.

Specific functions and monitoring contents

Radial vibration: Monitoring the radial vibration (1X, 2X, full vibration) of the bearings of key rotating machinery such as steam turbines and compressors.

Axial displacement: Monitoring the axial position (key phase) of rotating shafts to prevent damage to thrust bearings.

Speed and phase: Used to measure the rotational speed of the machinery (RPM) and determine the relative position of the shaft, for vibration analysis.

Cresting: Monitoring the shaft eccentricity of large units during startup or shutdown processes.

For additional discounts, please contact our five-star sales manager Lisa Lin.