Claim Your Exclusive Savings – Get in Touch with Sales Manager Lisa Lin Now

: +86-18965423501                            : sales7@amikon.cn                             :AMKPLC

The 3300 XL 8 mm Proximity Transducer System consists of:

One 3300 XL 8 mm probe

One 3300 XL extension cable

One 3300 XL Proximitor Sensor

The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.

Frequently Asked Questions

Q1: What is the Bently Nevada 330102-02-12-50-01-CN?

A1: It is a 3300 XL 8 mm proximity probe designed for non-contact vibration and shaft displacement measurement in rotating machinery.

Q2: What does the “02” option indicate?

A2: “02” specifies an unthreaded length of 0.2 inches.

Q3: What does the “12” option represent?

A3: “12” indicates an overall case length of 1.2 inches.

Q4: What does the “50” option represent?

A4: “50” refers to a total cable length of 5.0 meters (approximately 16.4 feet).

Q5: What does the “01” option indicate?

A5: “01” typically represents a standard configuration within the probe series.

Product Applications

Electric power industry: Monitor the rotational shaft vibration and axial displacement of steam turbines, water turbines and large generators to ensure the safe operation of the units at high speeds.

Petroleum and natural gas: Used for displacement measurement of centrifugal compressors, reciprocating compressors and oil pumping station equipment to prevent mechanical failures that cause shutdowns.

Chemical and petrochemical: Monitor the radial vibration of rotors in key units (such as turbines, reactor mixers) to provide real-time feedback on mechanical wear conditions.

Large factories and mines: Applied to the health monitoring of core rotating equipment such as large blowers, fans and mills.