Claim Your Exclusive Savings – Get in Touch with Sales Manager Lisa Lin Now

: +86-18965423501                            : sales7@amikon.cn                             :AMKPLC

330130-075-01-05 is a 3300 XL mm Standard Extension Cable manufactured by Benty Nevada and usd in proxinity transucer system, Additionaly. the 300 XL probe and extension cable represent advancements overeartier models The bond between the probe tip and the probe body is stronger thanks to a unique TiplocTMmolding process Adtionaly, the cable of the probe is more fimly fastened thanks to the use of the unique CablelocTM design,which offers 330 N (5 lbf) pullstrengthwhere the cable conects to the probe tip. You can also get 330 XL  mm Probes and Extension Cables with a Fuidloc cable option. Through the interior of the cable. this option stops oil and other liquids from leaking out of the machine.

The CickLocIM connectors on the 3300 XL probe, extension cable, and Proxinitore Sensor are corrosion-resistant and gold plated. The precisely designed ockingmechansm prevents the conectors from losing and only requites finger tght force to engage (connectors will cick). They can be installed or removed without the useof any specialized equipment You can get extension cables and 3300 XL 8 mm probes with connector shields aready attached Additionly. connector covers may beprovided separately for on sie installation Such as when the cable must be run througha restrictive conduit, Al instalations shoud incude comector protectors since they promote environmental protection.

Frequently Asked Questions

Q : What does the complete part number 330130-075-01-05 stand for?

A : 330130 represents the 3300 XL 8mm Standard Extension Cable; -075 means the cable length is 7.5 meters; -01 indicates the stainless steel armor option; -05 denotes multiple standard approvals/hazardous area certifications.

Q : What is the temperature rating for the 330130 cable? Can it touch the bearing housing?

A : The operating temperature range is -35°C to +200°C (-31°F to +392°F). It can be routed inside most high-temperature bearing housings but should not touch extremely hot surfaces like steam lines over 200°C.

Q : What are the noise-prevention guidelines when laying extension cables in cable trays?

A : Do not run transducer cables parallel to high-power motor cables or VFD lines in the same tray. If they must cross, route them at a 90-degree right angle to minimize electromagnetic interference (EMI).

Q : Can I order the product by just quoting the base number "330130"?

A : No. 330130 is only the base part number. Without specifying the length (-075), armor (-01), and approval (-05) suffixes, the factory cannot process the order.

Product Applications

Oil and Gas: Cracking compressors and large pump sets for oil refineries and natural gas processing plants.

Power Generation: Steam turbines and generator sets for thermal power plants, hydroelectric power plants, and nuclear power plants.

Petrochemicals: Ethylene plants, large synthetic ammonia compressors, and various high-speed centrifugal pumps.

Metallurgy and Mining: Blast furnace blowers and large rolling mill gearboxes for steel plants.