Claim Your Exclusive Savings – Get in Touch with Sales Manager Lisa Lin Now

: +86-18965423501                            : sales7@amikon.cn                             :AMKPLC

The 3300 NSv probe comes in varying probe case configurations, including armored and unarmored 1/4-28, 3⁄8-24, M8X1, and M10X1 probe threads. The reverse mount 3300 NSv probe comes standard with either 3⁄8-24 or M10X1 threads. All components of the transducer system have gold-plated brass ClickLoc connectors. ClickLoc connectors lock into place and prevent the connection from loosening. The patented TipLoc molding method provides a robust bond between the probe tip and the probe body. Bently Nevada’s patented CableLoc design provides 220 N (50 lb) of pull strength and securely attaches the probe cable to the probe tip.

Connector protectors are recommended for use on the probe-to-extension cable connection, as well as on the cable-to-Proximitor Sensor connection. Connector protectors prevent most liquids from entering into the ClickLoc connectors and adversely affecting the electrical signal.

Notes:

Proximitor Sensors are supplied by default from the factory calibrated to AISI 4140 steel. Calibration to other target materials is available upon request.

Silicone tape is also provided with each 3300 NSv extension cable and can be used instead of connector protectors. Silicone tape is not recommended in applications where the probe-to-extension cable connection will be exposed to turbine oil.

Frequently Asked Questions

Q1: What is the Bently Nevada 330904-00-06-10-02-05 3300 NSv Probe used for?

A1: The Bently Nevada 330904-00-06-10-02-05 3300 NSv Probe is designed for non-contact measurement of shaft vibration, axial position, runout, and displacement in rotating machinery.

Q2: What is the shield resistance of the 330904-00-06-10-02-05 probe?

A2: The 330904-00-06-10-02-05 probe has a shield resistance of 0.066 Ω/m (0.020 Ω/ft), providing effective shielding against electrical interference and ensuring reliable signal transmission.

Q3: What is the 330904-00-06-10-02-05 typical extension cable capacitance?

A3: The 330904-00-06-10-02-05 probe is designed to work with an extension cable having a typical capacitance of 69.9 pF/m (21.3 pF/ft), maintaining stable electrical characteristics throughout the transducer system.

Q4: What is the 330904-00-06-10-02-05 recommended gap setting?

A4: The 330904-00-06-10-02-05 recommended installation gap is 1.0 mm (40 mils), allowing the probe to operate within its calibrated range for accurate and repeatable measurements.

Product Applications

Oil & Gas: Used for shaft vibration monitoring in offshore drilling platforms, natural gas compressors in refineries, high-pressure water injection pumps, and liquefied natural gas (LNG) transfer pumps.

Petrochemical & Chemical: Used in oxygen generators, process gas compressors, and agitator shafts in large reactors. Its excellent chemical resistance withstands harsh chemical process gases.

Power Generation: Used for internal condition monitoring of bearing housings in small and medium-sized gas turbines, steam turbines, and hydroelectric generator sets, as well as critical feedwater pumps in power plants.