Claim Your Exclusive Savings – Get in Touch with Sales Manager Lisa Lin Now

: +86-18965423501                            : sales7@amikon.cn                             :AMKPLC

The 3300 XL NSv Proximity Transducer system is intended for use with centrifugal air compressors, refrigeration compressors, process gas compressors, and other machines with tight installation requirements. The 3300 XL NSv Proximity Transducer System consists of:

A 3300 NSv probe

A 3300 NSv extension cable

A 3300 XL NSv Proximitor Sensor¹

The primary uses for the 3300 XL NSv Transducer System are for areas where counter bore, sideview, or rearview restrictions limit the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for small target applications, such as measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in).

It is primarily used in the following applications on fluid-filmed bearing machines where a small shaft or reduced side-view is present:

Radial vibration and radial position measurements

Axial (thrust) position measurements

Tachometer and zero speed measurements

Phase reference (Keyphasor signals)

Frequently Asked Questions

Q1: What is the Bently Nevada 330905-00-19-10-02-00 3300 XL NSv Transducer System used for?

A1: The Bently Nevada 330905-00-19-10-02-00 3300 XL NSv Transducer System is used for non-contact measurement of shaft vibration, axial position, runout, and displacement in rotating machinery.

Q2: What does Overall Case Length Option (19) indicate?

A2: Overall Case Length Option (19) specifies an overall case length of 190 mm, making the probe suitable for applications requiring extended installation depth.

Q3: What does Total Length Option (10) represent?

A3: Total Length Option (10) indicates a total cable length of 1.0 meter (39 inches), providing a standard system length for industrial installations.

Q4: What is the 330905-00-19-10-02-00 typical extension cable capacitance?

A4: The 330905-00-19-10-02-00 transducer system features a typical extension cable capacitance of 69.9 pF/m (21.3 pF/ft), ensuring controlled electrical characteristics and stable signal transmission.

Product Applications

Oil & Gas: Natural gas compressors and water injection pumps for offshore drilling platforms, refineries, and long-distance pipelines.

Power Generation: Axial and radial condition monitoring of bearings in gas turbines, small steam turbines, and hydroelectric turbine units.

Chemical & Petrochemical: Process gas compressors, large fans, and various high-speed fluid machinery.

Refrigeration & Compressors: Centrifugal air compressors and large industrial refrigeration compressors.