For additional discounts, please contact our five-star sales manager Lisa Lin.

Description：

The primary uses for the 3300 XL NSv Transducer System arefor areas where counter bore, sideview, or rearviewrestrictions limit the use of standard Bently Nevada 3300 and3300 XL 5 and 8 mm Transducer Systems. It is also ideal forsmall target applications, such as measuring radial vibrationon shafts smaller than 51 mm (2 in) or axial position on flattargets smaller than 15 mm (0.6 in). It is primarily used in thefollowing applications on fluid-filmed bearing machineswhere a small shaft or reduced side-view is present:

Radial vibration and radial position measurements

Axial (thrust) position measurements

Tachometer and zero speed measurements

Phase reference (Keyphasor signals)

Specification：

Frequently asked questions

1. What is the Bently Nevada 330904-00-13-10-02-CN 3300 NSv Proximity Probe?

The Bently Nevada 330904-00-13-10-02-CN is a 3300 NSv Proximity Probe designed for vibration and shaft position monitoring in machinery with limited installation space. 

2. What does the -13 case length option indicate?

The -13 option specifies an overall case length of 130 mm. This configuration provides additional installation flexibility while maintaining the probe's measurement accuracy and compatibility with the 3300 NSv system.

3. What is the 330904-00-13-10-02-CN supply sensitivity?

The 330904-00-13-10-02-CN probe system has a supply sensitivity of less than 2 mV change in output for changes in the supply voltage. This low sensitivity helps ensure stable and reliable measurements even when minor power supply fluctuations occur.

4. What is the 330904-00-13-10-02-CN output resistance?

The 330904-00-13-10-02-CN has an output resistance of 50 Ω, enabling efficient signal transmission to compatible Proximitor® Sensors and Bently Nevada monitoring systems with minimal signal loss.

Product Applications

Oil and Gas: Used for monitoring various high-risk, continuously operating process compressors and pump sets.

Petrochemical and Chemical Industries: Monitors rotating equipment in reaction units within environments filled with corrosive chemical gases.

Power and Energy: Monitors the shaft conditions of small and medium-sized industrial steam turbines, gas turbines, and hydroelectric generator sets.