English
Brand/Manufature:
GEProduct Origin:
USALead Time:
In StockCondition:
Brand NewCertificate:
Coo/Test report/Warranty letter|
Dimensions:4x21.8x29.2cm |
Voltage Input Range:-10 to +10 volts |
|
Weight:0.6kg |
Resolution: 16 bit |
|
Series：Series 90-70 |
Calibration: Factory set at 10 Volts +/- 2 mV |
|
Operating temperature:0 to 60°C |
Accuracy: +/- 0.07% of full scale, +/-0.1% of value |
|
Current Input Range: 4 to 20 milliamps |
Power Requirement: 0.4 Amps (2 watts) at +5 Volts |
|
IC697ALG440 describe The IC697ALG440 Current Expander Module is a 16-channel, high-level, analog input expander module from GE Fanuc. It has 16 input channels, 4 to 20 milliamps of current input range, and 0.4 Amps (2 Watts) of power requirement at +5 Volts. The IC697ALG440 Current Input Expander Module belongs to the Series 90-70 Programmable Logic Controllers product line manufactured by GE Fanuc. It has 16 current inputs with a 4 to 20 milliamps input current range. The IC697ALG440 Current Input Expander Module must be used with a base converter module and a voltage expander module to create an analog input subsystem for a programmable logic controller. |
|
+86 18965423501 
sales16@amikon.cn 
AMKPLC
Question: What is an IC697CMM742?
Answer: The IC697CMM742 is an Ethernet Interface from the GE Fanuc 90-70 Series.
Question: In Proficy what should I be doing?
Answer: You should make sure you select everything you see physically in front of you, in Proficy.
Question: How do I go into configuration?
Answer: Right click on slot #2, hit configure, give it an IP address, and a sub-net mask.
Question: What IP address should I give IC697CMM742?
Answer: Give it an IP address that is far above anything you have on your network so it doesn't get confused and when you ping it, you know you're only pinging this device.
Question: What should I do next?
Answer: Plug a local Ethernet cable into where it says 10 Base T. You should get a LAN LED blinking and that will let you know you're ready to ping this device.
Question: How do I ping it?
Answer: Go into Command Prompt, ask it to ping the address you put in, hit enter, and you will be looking for a reply.
Question: What else should I check on IC697CMM742?
Answer: You should check the AAUI port.
+86 18965423501 sales16@amikon.cn AMKPLC
|
GE |
|||
|
DS200SDCIG1ABA |
8851-LC-MT |
DS200ADMAH1AAC |
DS200EXPSG1ACB |
|
DS200SDCIG1AHB |
8811-IO-DC-01 |
DS200SNPAH1ABB |
DS200SHVIG1BGD |
|
DS200SDCIG2ABA |
8002-CC-85 |
DS200LDCCH1ALA |
DS200TBQDG1AFF |
|
DS200SDCIG2AGB |
8601-FT-NI |
DS200DTBDG1ABB |
DS200TCDAG1AEA |
|
DS200SHVMG1ACC |
8611-FT-FU |
DS200PTBAG1BBA |
DS200TCDAH1BHD |
|
DS200SHVMG1AFE |
8709-CA-08 |
DS200TCCBG1BED |
DS200TCRAG1ACC |
|
DS200SLCCG1ACC |
8750-CA-NS |
DS200TCQCG1BKG |
IS200TSVCH1ACB |
|
DS200SLCCG1AEE |
IC200UDD104 |
IS200PDIOH1A |
IS200TSVCH1AEC |
+86 18965423501 sales16@amikon.cn AMKPLC
Get regular updates and real automation insights straight to your inbox.
IPv6 network supportedDisclaimer: Amikon sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Amikon is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
